Canon ZR900 Camcorder User Manual


 
External Connections
52
4 When the scene you wish to
record appears, push the joystick
( ) toward / to begin
recording.
Recording starts.
5 While recording, push the joystick
( ) toward / to record pause.
In record pause mode, push the
joystick ( ) toward / again to
resume recording.
6 Push the joystick ( ) toward to
stop recording.
7 Connected device: Stop the
playback.
IMPORTANT
Blank sections may be recorded as
anomalous picture.
If the picture does not appear,
disconnect the DV cable and restore the
connection after a short while or turn the
camcorder off and then on again.
You can only record video signals in DV
standard (standard definition, SP or LP
mode) from devices carrying the
logo. Note that signals from identically
shaped DV (IEEE1394) terminals may be
in different video standards.
NOTES
We recommend powering the camcorder
using the compact power adapter.
Copyright Signal
Certain software tapes are copyright
protected. If you attempt to play back
such tape, “COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED” appears and
you will not be able to view the contents of
the tape. If you attempt to record from
such tape via the DV terminal,
“COPYRIGHT PROTECTED DUBBING
RESTRICTED” appears and you will not
be able to record the contents of the tape.
COPY