Filter
Top Products
53
Audio Dubbing
You can add sound to a recording using
the built-in or an external microphone.
POINTS TO CHECK
You can only dub audio on tapes recorded
in SP mode with [ 12bit] audio
( 41)
. This function is operated with the
wireless controller.
1 Locate the point where you want
to start dubbing audio.
Before locating the starting point,
you can also set the zero set
memory ( 35) at the point where
you want the audio dubbing to end.
The camcorder will automatically
stop audio dubbing at that point.
2 Start playback and immediately
press .
3 Press .
“AUDIO DUB.” and appear.
4 Press to begin dubbing.
Speak into the microphone.
5 Press to stop dubbing.
IMPORTANT
• Audio dubbing will stop if the tape has a
blank section or a section recorded in
LP mode or [ 16bit] audio.
• The quality of the dubbed sound will not
be as good when dubbing audio to a
tape that was not recorded with this
camcorder or after having dubbed audio
over the same scene more than 3 times.
NOTES
You can connect the camcorder to a TV to
check the picture on the TV screen and
check the sound through headphones
connected to the TV.
You can select the audio track that will
be played when playing back a tape
that was audio dubbed ( 42).
( 21)
REW
PLAY
FF
STOP
PAUSE
SLOW
AUDIO DUB.
ZERO SET
MEMORY
TV SCREEN
STOP
PAUSE
AUDIO DUB.
PAUSE
AUDIO DUB.
PAUSE
TO SELECT THE AUDIO TRACK FOR PLAYBACK
STOP
COPY