Filter
Top Products
GETTING READY
32
Turning the Camera On and Off
Press the power button to turn the camera on and off.
Pressing the power button to turn on the camera causes the
green operation lamp to flash . Press the power button again
to turn off the camera.
Green operation lamp
ON/OFF
Power button
IMPORTANT!
• If camera power is turned off by the Auto Power Off
feature, press the power button to turn it back on
again.
• Turning on camera power while the mode dial is set to
recording mode causes the lens to extend from the
camera. Make sure there is nothing in front of the
camera that can be hit by the lens when you turn on
the camera.
• The AC adaptor may become warm to touch after extended
periods of use. This is normal and is not cause for alarm.
• After using the camera, turn it off and unplug the adaptor
from the AC outlet.
• The camera automatically switches over to AC adaptor
powered operation whenever the AC adaptor is plugged
into the camera.
• Always use the AC adaptor to power the camera whenever
it is connected to a computer.
• Never place a blanket or any other cover on the AC adap-
tor. Doing so creates the risk of fire.