Filter
Top Products
178
Appendix
Though available
lighting is bright,
the faces of people
in the image are
dark.
Not enough light is reaching the subjects. Change the flash
mode setting to
<
(Flash On) for daylight synchro flash (page
45), or adjust EV shift to the + side (page 40).
Night shots come
out bad.
Use the following BEST SHOT scenes (page 66) when shooting
at night.
• High Speed Night Scene (for shooting night scenery only)
• Night Scene Portrait (for shooting people against night
scenery)
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Change the flash mode setting to
<
(Flash On) for daylight synchro flash (page 45), or adjust EV
shift to the + side (page 40).
Digital zoom will
not go up to the
maximum value.
The digital zoom setting may be turned off. Turn on digital zoom
(page 92).
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 165).
3)Focus is fixed during movie recording.
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
edited (with White
Balance,
Brightness,
Trimming,
Rotation, Resize).
Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
• CS group snapshots
•Movies
• Snapshots recorded with another camera
Problem Possible Cause and Recommended Action
B