Filter
Top Products
34
Snapshot Tutorial
With the Make-up Mode, the camera detect faces automatically and makes
adjustments to maximize facial brightness and beauty.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the seventh Control Panel option from the
top (Make-up).
3. Use [4] and [6] to select a level of “+1” or
greater, and then press [SET].
• This will enter the Make-up Mode, which is indicated
by ± on the monitor screen.
• You can set one of 12 levels in the range of “+1
(Min.)” (Minimum correction) to “+12 (Max.)”
(maximum correction). The larger the value, the
greater the processing that is performed.
• Selecting a level of “0 (Off)” will exit the Make-up
Mode.
4. Point the camera at the subject(s).
The camera will detect human faces and display a frame around each one.
5. Half-press the shutter button.
The camera will focus on the face, which will cause frames around it to turn
green.
6. When you are ready to shoot, press the shutter button all the way
down.
NOTE
• The following functions cannot be used together with the Make-up Mode.
Continuous Shutter, Triple Self-timer
Shooting with the Make-up Mode (Make-up)
Make-up icon