Filter
Top Products
36
Snapshot Tutorial
. To pre-record the faces of family members, etc.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the sixth Control Panel option from the top
(Face Recognition).
3. Use [4] and [6] to select “K Record Family” and then press [SET].
4. With the camera pointed straight at the face of
the person you want to pre-record, align the
frame on the monitor screen with the face and
then press the shutter button.
5. When the message “Face recognition
successful!” appears, use [8] and [2] to select
“Save” and then press [SET].
NOTE
• You can pre-record a total of 12 faces, for up to six different individuals.
• Face data is stored in the camera’s built-in memory, in a folder named “FAMILY”
(page 123).
. To assign a priority level to pre-recorded face data
You can use the procedure below to assign names and priority levels to pre-recorded
faces.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the sixth Control Panel option from the top
(Face Recognition).
3. Use [4] and [6] to select “
J
Edit Family” and
then press [SET].
This will display the face data editing screen.
4. Use [8], [2], [4], and [6] to select the face data
you want to edit, and then press [SET].
5. Use [4] and [6] to select a name, and then
press [2].
Using the Family First Mode (Family First)
Face data editing
screen