Filter
Top Products
64
Printing
. Configuring DPOF Settings Individually for Each Image
Procedure
Enter the PLAY Mode * MENU * DPOF Printing * Select images
1. Drag left or right to display the image you want to print.
2. Touch the number of copies value.
3. Touch “ú” or “õ ” to specify the number of
copies.
You can specify a value up to 99. Specify 0 if you do
not want to print the image.
4. Touch “OK”.
• Touch “DATE” to toggle it between “ON” (date printed) and “OFF” (date not
printed). Toggling from “OFF” to “ON” automatically changes the number of
copies value to 1.
• The images that will be printed are marked with a check mark (v).
• Repeat steps from 1 to 4 to configure settings for other images, if you want.
5. Touch “OK”.
. Configuring the Same DPOF Settings for All the Images
Procedure
Enter the PLAY Mode * MENU * DPOF Printing * All images
1. Touch “Date stamping”.
2. Touch “On” to turn date stamping on or “Off” to turn it off.
• Switching from “Off” to “On” automatically changes the number of copies value
to 1.
3. Touch “ú” or “õ ” to specify the number of prints.
You can specify a value up to 99. Specify 0 if you do not want to print the image.
4. Touch “OK”.
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “0” for the
number of copies of all images.
Number of copies
B