Filter
Top Products
84
Other Settings (Set Up)
Procedure
MENU * Setup * Startup
To play the movie that comes pre-recorded in camera memory each time you turn on
power, select “On” for this setting.
• The startup movie does not play when you turn on the camera by pressing [p]
(PLAY).
Procedure
MENU * Setup * File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 80).
Turning the Startup Movie On or Off (Startup)
Specifying the File Name Serial Number Generation Rule
(File No.)
Continue
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered by the camera, numbering of new files will start from the
largest sequential number in the existing file names plus 1.
Reset
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the existing file
names number plus 1.