Filter
Top Products
65
Troubleshooting
Playback
Symptom Probable Cause Action
ALL DATA IS
PROTECTED!
Stays on moni-
tor and images
do not appear.
Delete operation
does not start
when DEL is
pressed.
All buttons and
switches do not
operate.
Very bright or
very dark LCD
image
No buttons or
switches oper-
ate.
LCD monitor is
too bright or too
dark.
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 47).
1. Unprotect the page
you want to delete
(page 46).
2. Change to a normal-
size, 1-page display
format.
Remove batteries and
disconnect the AC adap-
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an autho-
rized CASIO service pro-
vider.
Adjust the BRIGHT set-
ting (page 11).
Remove batteries and/or
unplug the AC adaptor.
Reload batteries and/or
plug in AC adaptor and try
operation again.
Adjust the BRIGHT
(brightness) setting.
Protected memory pages
are hidden.
1. All pages are pro-
tected.
2. Multi-page display
(page 36) or zoom dis-
play (page 40)
Malfunction due to static
electrical charge or strong
impact
Wrong BRIGHT setting
Malfunction due to expos-
ing camera to electro-
static charge.
Incorrect BRIGHT setting
Deletion
Other
66
Reference
Symptom Probable Cause Action
Cannot ex-
change data be-
tween two cam-
eras
Cannot transfer
data (error
keeps occur-
ring)
Keys of con-
nected camera
are disabled.
1. Connect correctly
(page 57).
2. Turn power on after
connecting cable.
3. Set function switch to
PLAY (page 32).
1. Correct the situation
and try again.
2. Correct the situation
and try again.
3.Change function
switch setting of re-
ceiving camera to
PLAY (page 32).
4. The sending camera’s
protected memory
pages are hidden. Un-
hide protected memory
pages by holding down
[–] while turning power
on (page 47).
5. Replace batteries or
use the AC adaptor
(page 13).
6. Securely reconnect the
cable.
Normal operation will re-
turn when you exit data
communications by press-
ing EXIT.
1. Incorrect cable con-
nection
2. Camera connected to
is not turned on.
3. Function switch sets to
REC.
1.Sending camera’s
memory is empty.
2. Receiving camera’s
memory is full
3. Receiving camera’s
function switch is in
REC position.
4. The message “ALL
DATA IS PROTECT-
ED” is on the monitor
of the sending camera.
5. Low battery
6. Disconnection of cable
during data communi-
cation
Connected camera op-
eration is disabled during
data communications.
Other
67
MEMORY ERROR
#2~#3
CONSULT THE
OWNER’S MANUAL!
Messages
MEMORY FULL All 96 memory pages are used. Pages must be de-
leted (page 48) before further recording is possible.
MEMORY EMPTY No images are stored in memory.
Problem with internal memory. Perform the following
procedure.
1. Press [+].
2. After checking that the ERROR RESET message
is on the display, press the shutter button to per-
form a system reset or turn power off if you do not
want to perform a system reset. The display should
return to normal after the system reset is complete.
• Never turn off power while the system reset is in
progress! Doing so will damage camera memory
are require servicing by an authorized service
provider!
• Be sure to power the camera using the AC adap-
tor or a new set of alkaline or lithium batteries.
Weak batteries or manganese batteries can re-
sult in a power failure while the system reset op-
eration is in progress, causing damage to cam-
era memory.
Important!
• System reset can result in a change in the order of
images stored in camera memory.
• Corrupted images may be lost entirely.
• If image data is partially corrupted, parts of the im-
age may not be recoverable.
Problem with internal memory. Contact your dealer or
an authorized CASIO service provider.
ERROR RESET
YES SHUTTER
NO CALL TECH
SUPPORT
MEMORY ERROR
#1
YES
NO CALL TECH
SUPPORT!
68
Reference
Specifications
General
Recording System... Digital (JPEG based)
Signal System ......... NTSC
Recording Medium .. Built-in 2MB flash memory
Number of Pages .... 96
Delete Functions ..... Single page; All pages (with page protect feature)
Imaging Device ....... 1/5-inch CCD (Total Number of Pixels: 250,000)
Lens ........................ Fixed focus with macro position; F2.8/f = 5.2mm
Aperture .................. F2.8/F8 manual switching
Focal Length ........... F2.8/NORMAL : 0.6m to 3.0m/2.0 to 9.8 feet
F2.8/MACRO : 12cm to 14cm/4.7" to 5.5"
F8/NORMAL : 0.4m to ∞/1.3feet to ∞
F8/MACRO : 10cm to 18cm/3.9" to 7.1"
(from lens protection filter)
Light Metering ......... TTL center point by photographic element
Exposure Metering .. Aperture priority AE
Exposure Range ..... EV +6 to 18
Exposure Adjustment ...
-2EV to +2EV
Shutter System ....... Electronic
Shutter Speed ......... 1/8 to 1/4000 second
White Balance ......... Automatic
Self-timer................. 10-second
Monitor .................... 61,380-pixel 1.8-inch TFT low-glare color LCD;
doubles as finder
Terminals ................ DIGITAL; VIDEO OUT; DC IN 6V
Power Supply .......... Batteries (AA-size Alkaline or Lithium batteries X 3)/
AC Adaptor (AD-C67)
Power Consumption ..
3.2 W