Cisco Systems 3.1(6) Security Camera User Manual


 
If the server that you are configuring is going to run Active Directory, you must enable File
and Print Sharing For Microsoft Networks. This is required because Active Directory uses
Networking in order to share the Active Directory files. This applies even when the server is
the only one in the entire network that runs Active Directory because the server accesses the
files locally via the share path \\server_name\directory_name\file_name.
At the end of the installation, click Finish, and the server automatically restarts.17.
Log onto Windows 2000 as Administrator.18.
When the login process is complete you might see the Windows 2000 Configure Your Server menu
screen which indicates you need to Finish Setup.
If you do leave it open, it is used in the next task. If you do not complete Finish Setup, the next task
explains how to finish the process manually.
19.
Task 3: Complete the Message Queing Configuration
You installed Message Queueing in Task 2. It requires a few final configuration tasks before the installation is
complete.
If you see the Windows 2000 Configure Your Server menu screen similar to this image, select Finish
Setup.
Then proceed to step 3. If you do not see this screen, proceed to step 2.
1.
If you do not have the Windows 2000 Configure Your Server menu screen open, start the process for
completing the Message Queueing feature manually. Select Settings > Controls Panel >
Add/Remove Programs.
A menu screen similar to this image appears.
2.