Filter
Top Products
18
Trouble-shooting
Solving Media Errors
1. Release the Open Lever, and open the front cover.
2. Remove the ribbon.
a. If the paper is jammed:
1. Pull out any paper remaining in the printer, and cut off any wrinkled or partially printed areas evenly with
scissors.
Printing over an already printed area will cause the ribbon to stick, and the paper will jam again.
When pulling the paper out, pull it slowly. Application of too much force could damage the printer.
Cutting the paper
If the paper is not cut evenly, it may cause abnormal printing and or the paper to jam.
Then follow the methods as for setting the media (P.13).
○
×