Filter
Top Products
FlexCam iCam Digital — Appendix
21
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
FlexCam iCam Digital — Troubleshooting
20
Specifications
Gooseneck
20" (50.8 cm)
Weight
4 lb (1.81 kg)
Power Supply
12 VDC
Operating Temperature
32º F – 104º F (0º C – 40º C)
Image Sensor
1
/3" (8.5 mm) CMOS
No. of Effective Pixels
510(H) x 492(V), 251K pixels NTSC
628(H) x 582(V), 365K pixels PAL
Resolution
330 TV lines (horizontal)
Focus Range
1
/4" (6.35 mm) to infinity
Lens
8 mm (.32") D-mount glass lens
Gain Control
Auto
White Balance
Auto
Iris
Auto,electronic with flicker-free performance
Sensitivity
3 lux
S/N Ratio
>48 dB
Video Output
S-video and composite
USB
Video Format
NTSC
PAL
Exterior Color
Translucent blueberry with black accents
Cables
6' (1.83 m) USB cable
12' (3.65 m) S-video cable
Included Accessories
S-video to composite adapter
SCART adapter (PAL models)
Microscope couplers
Optional Accessories
910-171-320 FlexLite
™
910-171-327 Microscope eyepiece adapter
Part Numbers
910-171-102
910-171-102-PAL
Appendix
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
I’ve installed the FlexCam iCam Digital, but the picture doesn’t appear.
Connect the FlexCam iCam Digital to the computer using the supplied USB cable.Check to see that
the video source (S-video or composite) is set correctly. Ensure that the USB port is enabled in your
computer’s BIOS and in the Windows Control Panel/System Device Manager.
How do I know the driver for the FlexCam iCam Digital has been properly installed?
Right-click the My Computer icon on the desktop. Choose Properties. Click the Hardware tab, then
Device Manager. Click the plus sign next to the icon labeled Imaging.If the Imaging folder is missing,
you need to reinstall the drivers.
Why can’t I install the FlexCam iCam Digital with Windows 95?
Windows 95 does not support USB connections.You will need to upgrade to Windows 98 release II
(or a later version) to use the FlexCam iCam Digital.
Why can’t I install the FlexCam iCam Digital on Mac OS X?
The FlexCam iCam Digital is not compatible with Mac OS X.
Can I easily switch between multiple USB video capture devices on Mac OS?
No.To switch between devices, you must uninstall the driver(s) for one device and install the driver(s)
for the other.
Why doesn’t the FlexCam iCam Digital work after installing the drivers on Mac OS?
Connect the FlexCam iCam Digital to the computer using the supplied USB cable.Drivers may not be
properly installed or other USB video capture devices connected.
If you are experiencing other problems with your camera,
• Ensure all camera adapter/cable connections and electrical connections are done correctly and
completely.
• Check all equipment for faulty operation.
• Check all settings on your camera and adjust them for viewing conditions in the
presentation room.
If any component of any camera is damaged, contact ClearOne Technical Support for repair
information.
Troubleshooting