ClearOne comm FlexCam Digital Camera User Manual


 
General usage
To view images on a TV
1. Connect the camera to a TV.
2. Switch the TV to video mode by pressing the button on the TV front panel or remote
control (consult your owner's manual for further instructions).
Note: Not all TVs have video inputs. If your TV only has an antenna input, you will need a
modulator or a VCR with video inputs.
3. Turn camera on using the on/off switch located at the base of the gooseneck.You should see
an image on the television screen.
4. Position the camera.
5. Turn the focus ring to the left for close-up or to the right for distance.
To record images on a VCR
1. Connect the camera to a VCR using the S-video cable or composite adapter.
2. Switch the VCR to the video-in mode (consult your owner’s manual for instructions).
3. Turn camera on using the on/off switch located at the base of the gooseneck.
4. Turn the VCR/TV switch to VCR and the TV to either channel 3 or 4.
5. Position the camera.
6. Turn the focus ring to the left for close-up or to the right for distance.
7. Press record on the VCR.
To view images on a LCD projector
1. Connect the camera to a projector using the S-video cable or composite adapter.
2. Turn the projector on (consult your owner’s manual for further instructions).
3. Turn camera on using the on/off switch located at the base of the gooseneck.
4. Position the camera.
5. Turn the focus ring to the left for close-up or to the right for distance.
To use the microscope couplers
1. Slide the microscope coupler (26, 28 or 34 mm depending on the size of the microscope)
over the microscope eyepiece.
2. Adjust the camera to fit the camera lens into the coupler on the microscope.
FlexCam iCam Digital — Using the Camera
13
FlexCam iCam Digital — Using the Camera
12
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
VideoImpression for Windows
With ArcSoft VideoImpression you can create entertaining movies and slide shows that
incorporate photos, scene transitions and video clips.
To capture video in VideoImpression
1. Open
VideoImpression
by clicking the desktop icon or by selecting
VideoImpressio
n from
the
Start
menu.
2. Click
new
to access the video album screen.
3. If you have installed multiple cameras,click
Acquire
to open the Select Source window.
Choose ClearOne FlexCam iCam Digital and click
Select
.This will open a View Finder win-
dow that you can use to capture still images. Close the View Finder to return to the main
VideoImpression window.
Figure 14.VideoImpression start-up screen
Using the Camera
Figure 15.Selecting the camera