Filter
Top Products
Recharge
Plug in the solar panel charger, and the battery will charge whether the
switch is set to the OFF, ON or AUTO positions.
You can also charge the light with an approved power adapter (9V, 1A
AC adapter (not supplied).
Warning: Only Xepa Technology rechargeable batteries should be used!
Wireless Receiver
Wireless Receiver Instructions
Use AV cable supplied to connect to TV/Monitor
Insert the 12V AC power adaptor into the power jack on the receiver,
power it on.
Antenna: Adjust if necessary to get a clear picture.
Power/Buzzer Switch:
When the light detects movement, the receiver will emit a detection buzz
informing you that something has activated the motion detector on the unit.
o To turn off the warning signal, hold the power/buzzer switch on the
receiver until a long beep is heard. The warning signal is now off.
o To turn the warning signal back on, hold the receiver button until a
long beep is heard. The warning signal is now on.
Status indicator light: The indicator light on the receiver will flash
automatically when the receiver picks up movement. When no movement
is present, the light will turn off.
NOTES: This item is a wireless product, and may be affected by radio
Interference that could cause the warning signal or status indicator lamp to
turns off. To avoid this, please use in an area away from other electronics.