Concord Camera 1500 Digital Camera User Manual


 
15
ENU
USING CONCORD 1500 AS A WEB CAMERA
You may also use the camera as a web camera and a video conferencing camera.
Note:
The camera driver must be installed before connecting the camera to the computer to play PC Cam for the
first time.
1. Install the camera driver from the supplied CD-ROM.
2. Power on the camera, and press the
button until “ PCC “ is displayed on the LCD of the camera.
The display of “ PCC “ on the LCD indicates the camera’s entry to the PC Cam mode.
3. Connect the camera to the computer.
4. Launch Microsoft NetMeeting software.
Note:
If you do not have NetMeeting already installed on your computer, please visit www. microsoft.com for
instructions and free download.
REMARKS ON PC CAM INSTALLATION UNDER DIFFERENT WINDOWS OS
When the camera is used in the PC Cam mode and connected to the computer for the first time, the computer
will automatically find your camera and install it, the installation message will vary on the different Windows
Operating Systems.
Under Windows 98SE
1. The following message will pop up, indicating that the Windows system
recognizes a new device and is searching for the driver.
2. The following message will pop up to ask for insertion of Windows 98SE
CD-ROM. Insert the Windows 98SE CD-ROM into the CD-ROM drive,
then click “OK”.
3. Click “Browse” to find the driver.
4. Make sure the drive option is CD-ROM drive, then locate and double click
Win98 folder, then click “OK” .
USING CONCORD 1500 AS A WEB CAMERA
1500 UG-ENU (516167-00).indd 151500 UG-ENU (516167-00).indd 15 10/22/04 3:38:47 PM10/22/04 3:38:47 PM