Filter
Top Products
E73
Reference Section
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
The camera will turn off
to prevent overheating.
Either the inside of the camera or the batteries have become
hot.
The camera turns off automatically. Wait until the camera or
the batteries have cooled before resuming use.
–
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write” position.
–
This card cannot be
used.
An error occurred while accessing the memory card.
• Use an approved card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly inserted.
14,
F18
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card. If you
need to keep copies of any images, make sure to select No
and save the copies to a computer or other medium before
formatting the memory card. Select Yes and press the
kbutton to format the memory card.
F5
Not available if Eye-Fi
card is locked.
The write-protect switch of the Eye-Fi card is in the “lock”
position.
–
An error occurred while accessing the Eye-Fi card.
• Check that the terminals are clean.
• Confirm that the Eye-Fi card is correctly inserted.
14
Out of memory. Delete images or insert a new memory card.
14, 29,
71