Filter
Top Products
21
The Basics of Shooting and Playback
C Notes About the Flash
When you need to use the flash, such as when shooting in dark locations or when the subject is
backlit, press the m (flash pop-up) button to raise the flash (A5, 44).
C The Auto Off Function
• The time that elapses before the camera enters standby mode is about 30 seconds. The time can
be changed using the Auto off setting in the setup menu (A 72).
• While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b(e movie-record) button
19 0 0
1900
2 5m 0 s
25m 0s
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.