Filter
Top Products
Taking Pictures
– - 16 - –
Using the Flash
Pressing the flash button cycles your camera
through the various flash modes.
A symbol appears on the LCD screen to indicate
the flash mode. The flash cannot be used in
Video mode.
The following list describes each flash mode.
Automatic – Flash fires when conditions
require extra lighting.
Always on – Flash fires every time you take a photo, regardless of lighting conditions.
RedEye – Flash strobes to let the subject’s eyes adjust to the flash, then fires again
when the photo is taken.
Always off – The flash never fires.
Adjusting the Exposure
Set the exposure value (EV value) manually to
compensate for unusual lighting conditions such as
indirect indoor lighting, dark backgrounds, and strong
backlighting.
1. Turn on the camera and press the MENU
button.
2. Use the UP or DOWN buttons to select the
Exposure option.
3. Press the RIGHT button to enter the Exposure
submenu.
4. Use the LEFT and RIGHT buttons to set the
desired exposure compensation value.
5. Press the SET button to save your selection or
MENU button to cancel.
The flash mode and exposure value are displayed in
the OSD screen.
Flash
Button
Flash mode
Exposure
value