Filter
Top Products
Making Connections
– - 30 - –
Connecting to a Computer Using USB
1. Install the software driver included with the bundled CD-ROM.
2. Connect the supplied USB cable to the computer’s USB port (A). Connect the
other end of the cable to the USB port on the camera (B).
3. Make sure the camera is turned on.
4. The LCD screen turns off when the connection to the computer has been
successfully completed.
5. Open My Computer or Windows Explorer. A “Removable Disk” appears in the
drive list.
6. Double-click the “Removable Disk” icon to view its contents.
7. Files stored on camera are located in the folder named “DCIM”.
NOTES:
• You don't have to switch off the camera or the computer when
the USB connection is made.
• Refer to your computer’s manual for information regarding the
USB port location.
NOTES:
• The camera will remain on if the USB cable is disconnected.
• Windows 98SE: If this is the first time the camera has
been connected to the computer, Windows detects the
camera as an “Unknown device” and automatically completes
the required software installation.
A
B