Filter
Top Products
ESPAÑOL
ENGLISH
FRANÇAIS
DEUTSCH
PORTUGUÊS
DS8118 Manual-6 Lang. (086-002937-017)
PORTUGUÊS
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ITALIANO
ESPAÑOL
26 27
2. Press
or to set the number of prints of all stored images in the SD
card, for up to a maximum of 9 copies.
3. Follow the rest of the options to confirm the DPOF setting.
Slide (Slideshow)
You can play back all the images and movies in
a slideshow format. The interval between images
can be specified.
During the slideshow, press MENU to stop.
From here, you may choose to continue or
exit the current slideshow.
Slideshow Options
Settings Descriptions
Start Start Slideshow according to
the specified Interval and
Repeat options.
Interval Specifies the amount of time
the camera will display an image
before moving on to the next
image. The options are 3 sec.,
5 sec., and 10 sec.
Repeat When set to On, the slideshow
immediately replays when the
final image is displayed.
CONNECTING TO EXTERNAL DEVICES
USING A TRIPOD WITH THE CAMERA
You can secure your digital camera to a tripod to prevent camera shakes. To install,
screw the tripod to the Tripod Hole (
p.3).
CONNECTING TO A TV
You can playback the images and movies you have recorded on your TV. Connect
your digital camera to the TV via the video/audio cable included in the camera’s gift box.
Be sure to adjust the TV Out setting ( p.14) to correspond with your
country’s system (PAL or NTSC) before connecting the camera to the TV.
Caution: Turn off the TV and digital camera before connecting the video/audio cable.
1. Plug the video/audio cable into the Video/Audio Socket of the camera (
p.3).
2. Connect the cable’s yellow connector to the yellow AV input terminal of your
TV. Likewise, connect the white connector to the TV’s white terminal. Refer to
your TV’s manual for more information.
3. Turn the TV and digital camera on. Make sure to switch the TV to the
appropriate AV channel display.
The OSD is automatically off when the camera is connected to a TV.
Use an AC Adapter if you intend to connect the camera to a TV for a long
period of time.
CONNECTING TO A WINDOWS-BASED PC
Use the USB cable included to connect to your Windows PC. This enables you to
upload, download, edit, and playback pictures and movies onto your PC. However,
the software must be installed first.
• Pentium 166MHz • 16-bit colour display at 800x600
• 64MBytes RAM • USB 1.1 interface
• 350MBytes Hard disk space • Windows 98/98SE/ME/2000/XP
• CD-ROM drive
1. Insert the CD labelled “DS8118_8238” into your CD-ROM drive. The installation
will start automatically.
If the “autorun” feature is disabled on your PC, start the installation by
running [x:\setup.exe] where “x:” is the drive letter of the CD-ROM drive.
2
. Follow the on-screen instruction to complete the installation of the camera drivers
and software. When done, click on the [Finish] button on-screen to restart the PC.
For file transfer, select under USB mode before connecting the Camera
to the PC (
p.15). To use the camera as a Webcam, make sure that a video
conferencing software is installed first (sold separately). Then, select
under USB mode before connecting the Camera to the PC ( p.15).
Only the images and movies stored in the camera’s current memory device
(SD card or internal memory) will be visible on the PC.
The OSD is automatically off when the camera is connected to the PC.
1
. Turn on your PC and allow your system’s Windows operating system to boot up.
2. Turn off your digital camera. Connect the camera and your PC via the USB
cable. The USB terminal on your camera is located inside the Terminal Cover
(
p.3). Refer to your PC’s manual to locate the USB connection on the PC.
3. Turn on your digital camera to any Mode. The Status LCD on the camera now
shows - PC -.
4. The digital camera now appears as Removable Disk drive on your system’s [My
Computer] when
is selected.
2/2
Exit
OK
Menu
PLAY SETUP
Slide
OK
Exit
OK
Menu
Start
Interval
Repeat
5s
Off
Slide Show
OK
Pre-Installation Checklist
Installing Drivers and Software
Connecting the Camera to the PC