Filter
Top Products
Page 4Page 2 Page 3
CAUTION:
Use only the power adapters supplied with the Q-See unit.
We recommend Plugging the DVR and Cameras into a Transient
Voltage Surge Protector (UL-449 Rating)* 330 or lower clamping
voltage, Joule rating 400.
CONNECTING CAMERAS: QPSCDCA
3
Connect the video and power connectors from the cable to the camera
Connect the other video connector on the other end to the Video In port on the DVR
Connect the power connector on the other end of the cable to the power adapter
Attach the power adapter to a power source
NOTE: To record sound from the camera attach the audio connector to the camera
Attach the audio connector on the other end of the cable to an Audio In port on the DVR
Repeat the same process for cameras 2 through 4
A
B
C
D
E
A
3
CONNECTING TO A TV OR VGA MONITOR
4
Connect to a TV:
Plug the BNC to RCA adapter to the Video Out port on the DVR and then connect a RCA
cable (not included) to the adapter
Connect the other end of the RCA cable to the Video Input on the TV
Connect to a VGA monitor:
Plug in the VGA cable (not included) to the VGA port on the DVR
Connect the other end of the VGA cable to the Monitor
A
B
A
B
A
B
4
Yellow: Video Out
Black: Power In
Yellow: Video Out
Black: Power In
A
B
E
B
C
D