Filter
Top Products
Page 9 Page 10
Setting up the DVR to Backup Files
D
NOTE: If you stop recording while backing
up the files, the backup will go faster.
Insert a USB flash drive into the USB port
located on the front of the DVR. Press
the BACKUP button and enter the User Id
and Password if the system is password
protected. This will display the BACKUP
screen shown in (D1). Select the Date icon
and push ENTER. Select the date of files to
backup. The days with files will be high-
lighted. Select the START TIME and END
TIME and push the BACKUP button. This
will display the BACKUP INFO screen (D2).
This screen will show the START and END
time, the device, the space required, and
how much space is available. Select OK,
and the backup will start. A progress bar will
display (D3). Once the backup is complete,
a dialog box will display.
3
Enjoy
This Q-See product has undergone extensive quality control. If you have
any issues during the setup process, please contact our support department
before returning the product.
We have your solution!
1) Need assistance setting up the remote monitoring feature with your Q-See
DVR? Visit www.portforward.com/qsee
2) Visit our Q-See Support Section at www. Q-See.com for instant
troubleshooting tips, FAQs, DVR firmware downloads, Live Chat and More.
3) Contact our Support Team:
On the Web: (24/7) Visit the Technical Support Section
www.Q-See.com
By Phone (Monday thru Friday, 9am-5pm (PST)
Tech Support 1 (877) 998 3440, ext 539
Customer Service 1 (877) 998 3440 ext. 538
By Email:
ts@dpsi-usa.com
@
CONGRATULATIONS
on your purchase!
D1
D3
D2