Filter
Top Products
14D-Link DCS-6513 User Manual
Section 2: Assembly and Installation
1. Place the plastic cable cover onto the dual-holed plate and attach it using
the screw. (Figure 2.5)
2. Locate a suitable position on the ceiling for the mounting plate to be
installed.
3. Use the mounting template to mark the holes for installation.
4. Drill four separate 6mm holes corresponding to the holes in the
mounting template and insert the plastic anchors into these holes.
5. Attach the surface bracket to the ceiling using the screws provided.
6. Place the dome body onto the base of the camera. (Figure 2.6)
7. Attach the dome to the base of the camera using the three long screws
and the provided security screw.
Figure 2.5
Figure 2.6