Filter
Top Products
Connections
Video output connection
Connect the video output of the camera to the video input of a monitor or other
equipment. When using a "loop through" connection of two or more monitors, set the
75Ω switch of only the final monitor to on. Determine the type of cable according to the
distance of the connected equipment. The maximum cable lengths indicated below are
recommended for avoiding appreciable picture degradation.
3V-2V : 150 meters
5C-2V : 200 m
7C-2V : 300 m
10C-2V : 400 m
External sync input connection
The camera is automatically set for external sync by connecting a black burst (BB) or
composite video (VBS) signal to the Genlock input terminals. When using a "loop
through" sync connection to two or more cameras, set the 75Ω switch of only the final
camera to on.
6