Filter
Top Products
23
Important Note when focusing a 9-22mm Lens
To adjust lens zoom and focus, if using the 9~22mm lens model of ED560 series cameras, the
focus aiding lens cap must be used to simulate the dome being closed. Follow the steps below
to ensure that camera will stay in focus.
Step 1 Take the included focus aiding lens cap (shown below) from its small plastic bag.
Step 2 Open dome cover and place the Focus aiding lens cap on the lens making sure that the
caps notch is resting on the zoom knob.
Step3 With cap on, adjust the focus and zoom rings by loosening the knobs and turning the
rings until subject is in focus. Retighten the knobs when done.
CHAPTER 2 INSTALLATION