Filter
Top Products
CHAPTER 3 OSD MENU AND CONFIGURATION
32
3.1.4 BACKLIHGT
Even there is a massive backlight behind the object, bright images of the background and the object
can still be obtained by using the BACKLIGHT function.
1. Please direct the arrow to point to “BACKLIGHT” on the SETUP menu by turning the mini-
joystick UP (c) or DOWN (d).
2. Select the mode you would like to operate by turning the mini-joystick LEFT (e) or RIGHT (f).
NOTE:
Under the following conditions, the WHITE BALANCE function may not operate well. In
such cases, please select the AWC mode.
○
1
When the object’s surroundings have a high color temperature.
○
2
When the object’s surroundings are dark.
○
3
If the camera faces a fluorescent light directly or is installed in a place where the
illumination changes constantly, the WHITE BALANCE function may become unstable.
SETUP
LENS DC <┘
SHUTTER ___
> WHITE BAL. MANUAL <┘
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
SENS-UP AUTO <┘
SPECIAL <┘
EXIT
WHITE BAL.
RED |+++++++++| 32
BLUE |+++++++++| 39