Filter
Top Products
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
13 of 115
5 System Setup
5.1 First Time System Start
With factory default user settings the NVR will boot automatically and start the NVR software
application without requiring Windows Login and Application login.
The NVR should start immediately after power is applied. If necessary, push the front power
switch to start the NVR. By default, the NVR application starts with administrator user rights
level. With these settings the NVR will also enter the record mode in case of a restart after
power loss. For setup of user accounts including passwords please refer to Chapter 5.4.6
"User Account Settings". The default login is admin with no password
5.2 Main Console screen controls
After start-up the main screen will appear:
Status display area
PTZ control
System configuration
"Guard" mode setup (live monitoring events)
Scheduled recording setup
Start Playback window
Start: Start / disable application components
Sequence mode
Fullscreen display (frameless)
Multiscreen display modes