Filter
Top Products
61
a. Go to INPUT NO. selection and turn the joystick Left/Right to select alarm input
number from 1 ~4.
b. Type: Select Normal Close (NC), Normal Open (NO), NIGHT NC, NIGHT NO, or OFF
for alarm type.
NC: Enable a normal close alarm input.
NO: Enable a normal open alarm input.
NIGHT NC: Set camera at night mode with normal close alarm input. When there is
event triggered, the camera will be changed to day mode.
NIGHT NO: Set camera at night mode with normal open alarm input. When there is
event triggered, the camera will be changed to day mode.
OFF: Disable alarm input.
(diagram 3.25)
c. REACTION: The action will be taken when alarm is triggered.
OFF: No reaction will be taken when alarm is triggered.
POSITION: When the alarm is triggered, speed dome will go to the preset position.
Turn the joystick Left or Right to select on Position and press Enter key to select
position number. Turn joystick Left/Right to make selection. It is selectable from
1~192. Press Enter key again to confirm selection.
ALARM INPUTS
INPUT NO. 1
TYPE NO
REACTION POSITION
<┘
1
DURATION TIMEOUT
<┘
5
PRIORITY 1234
RETURN
ALARM INPUTS
<┘
ALARM OUTPUTS
<┘
MOTION DETECT
<┘
EXIT