- 15 -
6.6 DNR (Dynamic Noise Reduction)
Dynamic Noise Reduction in video images has the following effects.
1. Images are brighter and sharper.
2. When the level of noise is reduced, the performance of a camera can apparently be
improved.
3. When it is recorded digitally, reduced noise can reduce image file size.
As the level of gain changes, the background noise in the low light level automatically
decreases.
1. Please direct the arrow to point to “DNR” on the SETUP menu by using the UP and
DOWN buttons.
2. Select the mode you would like to operate by pressing the LEFT or RIGHT button.
Ö OFF: No reduction in noise level.
Ö LOW: Little reduction in noise level with nearly no ghost image. Default value is
LOW.
Ö MIDDLE: Just enough reduction in noise levels without causing much ghost
imaging.
Ö HIGH: Huge reduction in noise level, which may cause much ghost imaging.
6.7 SENS-UP
SENS UP is used to keep a brilliant, vivid screen image by automatically detecting changes in
the level of light under low light level conditions.
1. Please direct the arrow to point to “SENS UP” on the SETUP menu by using the UP and
DOWN buttons.
2. Select the mode you would like to operate by pressing the LEFT or RIGHT button.
Ö AUTO: Low light level auto mode. Default value is AUTO (Up to X 10).
SETUP
LENS DC <┘
SHUTTER ___
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
> DNR LOW
SENS-UP AUTO <┘
SPECIAL <┘
EXIT
NOTE:
When AGC is turned off, DNR will be disabled.