Filter
Top Products
11
I. CAMERA VIEW:
The lighting condition of the area where the camera views. SHADOW or HIGHLIGHT.
II. SLOW SHUTTER:
When the setting is OFF, it only operates with AGC in low light condition and keeps the color
image.
When select “ON” then camera will merge into the slow shutter mode in low light condition. User
can set slow shutter limit from 2x ~ 32x and select COLOR or B/W image when slow shutter is
operation by setting SS PROTERTY. Otherwise, user can set the slow shutter start level with SS
THRESHOLD. Setting the parameter smaller let slow shutter start in more highlight condition,
and larger, in more lower light condition
The default SLOW SHUTTER setting is OFF.
.
III. WDR MODE:
The camera offers outstanding Wide-Dynamic Range (WDR) up to 120dB.
Select “AUTO”, the camera will automatically adjust to a suitable Wide Dynamic Range
according to the lighting condition. In “AUTO” mode, the default BIAS is set at “0” but user can
further define the BIAS of WDR. When you feel the contrast of lighting condition is larger,
increase the BIAS. When you feel the contrast is smaller, decrease the BIAS. Under low contrast
condition, set the LIMIT of WDR to a lower value to get better images.
Select “ MANUAL”, user can manually set the Dynamic Range by moving the tag along 0 to 36
level bar. When contrast of lighting condition is larger, increase the number, otherwise
decrease the number towards “0”.
IV. METER MODE:
For setting a frame of the lighting measurement.
Select “ NORMAL” during the normal lighting condition. Choose a suitable frame location, such
as FULLSCREEN, CENTER, LOWER1/3 and USER. If “USER” is selected, there will be a frame
in green color shown on the screen. Use the cursor buttons e f c d to move the location of the
frame, then press SET button. The color of frame will turn to white. Use e f c d buttons to
enlarge the frame size, and press SET button. After resizing, the frame color will turn to red, use
e f c d buttons to shrink the frame size, press SET button to accept the final setting.
Select “ BACKLIGHT” in the strong backlight environment, for example, the lighting condition of
building lobby. Set a suitable location or size of the frame by using the same setting procedures
as “ NORMAL”.
LINELOCK
V PHASE
>V PHASE ++++++++
0 519 624
PREVIOUS PAGE…
LINELOCK SETTING
>LINELOCK <AUTO…>
<OFF>
PREVIOUS PAGE…