Filter
Top Products
7
Operation
3.2 Display/Close the user setup menu screen
SET
Butto
n
Highlighted
600 SERIES MAIN MENU
> PRESETMODE INDOOR..
CAMERA ID OFF
ADVANCED SETUP ..
EXIT MENU
The Cursor Buttons & the SET Button
I. Press the SET button for 2 second
The menu screen will appear on the monitor as the block shown above.
II. Using the cursor button
Use the cursor button c or d to move the cursor up or down. Use the cursor button e or
f to adjust the mode or parameter of settings. The select item will be highlighted with a blue color bar.
III. Switch to sub-menu screens
When the item with sub-menu is selected (highlighted), press the SET button to switch to the sub-menu .
for further settings. Please refer to the figure below.
600 SERIES MAIN MENU
PRESET MODE INDOOR..
CAMERA ID OFF
> ADVANCED SETUP..
EXIT MENU
ADVANCED SETUP
> LENS
WHITE BALANCE..
VIEWING..
SAVE/RESTORE..
PREVIOUS PAGE
Main Menu
Sub-Menu
Note: For those select items with “…” sign in the end, they have the sub-menu for further
settings.
IV. Return to previous page
After setting, use the cursor buttons to select PREVIOUS PAGE, then press the SET
button.
V. Close the menu screen
To close the menu screen, use the cursor button to select EXIT MENU and press the
SET button. Or press the SET button for 1 sec.