Filter
Top Products
4.1 Camera Dimensions and Mounting Facilities
The 2K and 4K TDI camera housing is manufactured with high precision. Planar,
parallel, and angular sides guarantee precise mounting with high repeatability.
The 2K and 4K TDI camera housing is equipped with four M4 mounting holes on the
front and two M4 mounting holes on one side and on the bottom of the camera.
Use caution in the following ways to avoid stripping threads or stressing the
case:
• Use only M4 screws.
• Do not over torque; do not over tighten screws beyond the depth of the holes; do
not otherwise force screws or create a bending moment with them
• Use caution in crafting mounting brackets so that you do not interfere with the lens, or
exert force on the lens extender tube barrel, or torque or otherwise place force on any
of the connectors on the back of the case. A "L" mounting bracket (section 4.3) is
available; contact your Fairchild Imaging representative for more details.
4.2 Lensing
The 2K TDI camera as shipped from the factory accepts M58 and F mount lenses
that are available from a number of suppliers. The 4K TDI camera only excepts M58
lens types.
When the lens mount (lens extender tube and its lockring) is removed, the front
surface of the camera is seen as a square with a large threaded hole in the center.
The "z" distance from the surface of the square to the top of the sensor is 13.72mm.
Fairchild Imaging • CAM/CCD 2KCL.TDI & CAM/CCD-4KCL.TDI Line Scan Camera User’s Manual • Rev C• 23 of 30