Filter
Top Products
PARTS NAMES
6 Camera setup section (under the cover)
This unit factory settings are as indicated below. These settings are for when using a 1/3 inch CS mount DC
(without EE internal amplifier) type lens. However, if due to installation conditions or environment the settings
may need to be modified for best results (see "SETTINGS"). To access the controls, remove the cover fixing
screw, then remove the cover.
Control name Position
a
Color and Black/White level switch (C-BW) L
b
Internal/Line lock switch (SYNC) INT
c
Red and Blue color adjustment volume (R, B) about center
d
White balance switch (WB) A
e
Electronic iris (EI)/Backlight compensation (BLC) switch OFF
f
Auto-iris lens switch (A.I. LENS) DC
g
Lens iris level volume (LEVEL) about center
Notes:
• The EI/BLC switch cannot be used simultaneously.
• When using a 1/2 or 2/3 inch C mount VIDEO (with EE internal amplifier) auto-iris type lens, set the
A.I. LENS switch to the VIDEO position.
• If not using an auto-iris lens, make sure the BLC switch is set to OFF.
LEVEL
DC
VIDEO
A. I.
LENS
LH
VR301
ON
OFF
ON
WB
A
M
BLC
EI
VR302
BR
VR303
SYNC
L-L
INT
C-BW
L
H
b
c
d e f g
6
a
L53S4/US GB 1998, 10, 27
English 5