Filter
Top Products
ADJUSTMENT
Adjusting the lens
Once the camera has been installed, adjust the lens section.
1
Tighten the pan adjustment screw.
Model: VDC-D2184VA
Loosen the pan adjustment screw, adjust the panning position of
the lens and then re-tighten the screw.
Model: VDC-D1184VA
Remove the lens unit
A
from the pan chassis, loosen the pan
adjustment screw
B
, turn the chassis to adjust the panning
position to a position where one of the three screw holes
C
is
visible, and then re-tighten the screw.
2
Loosen the tilt adjustment screw, adjust the tilting position of the
lens and then re-tighten the screw.
3
Loosen the zoom lever screw, turn the zoom lever
counterclockwise to determine the zoom position while viewing
the camera images on the monitor, and then re-tighten the screw.
4
Loosen the focus lever screw, turn the focus lever
counterclockwise to determine the focus position while viewing
the camera images on the monitor, and then re-tighten the screw.
Note:
Be careful not to touch the lens section when changing the
angle of the camera.
3
4
1
2
A
B
C
C
C
Model: VDC-D2184VA
Model: VDC-D1184VA
L5AK4/US, L5AL4/US GB 2003, 6, 6
English
11