Filter
Top Products
36
Using the Q Button
Flash Photography
Flash Photography
Use shoe-mounted ash units for additional lighting at night or indoors under low light.
1
Remove the hot shoe cover and slide the ash onto the hot
shoe as shown, stopping when it clicks into place.
Optional Flash Units
Optional Flash Units
The camera can be used with optional FUJIFILM shoe-
mounted ash units (P 112). Do not use third-party ash
units that apply over 300 V to the camera hot shoe.
The Sync Terminal
The Sync Terminal
Use the sync terminal to connect ash units that require a sync cable.
Removing the Flash
Removing the Flash
Flash units mounted on the hot shoe can be removed by lowering
the ash and pressing the PUSH button while sliding the unit from
the shoe.
2
Raise the ash.