Filter
Top Products
28
When a cartridge that was removed in mid-roll j is
re-loaded, the film will automatically be advanced to
the first unexposed frame. After that, operation is as
before.
✻ Even if you forget how many frames were exposed
on a cartridge that was removed in mid-roll, just
re-load the cartridge. The camera will
automatically set the remaining number of
unexposed frames and display that number on the
Liquid Crystal Display.
◆
Cautions Concerning the Mid-roll Change Function
✻ When a cartridge that has been removed in mid-roll (
j is
displayed) is re-loaded into the camera, if “ B ” blinks in the
film counter, re-load the cartridge once more, avoiding the
following locations.
• Anywhere near a drier, fan, vacuum cleaner, etc., which
has a rotating motor.
• Near an active TV or personal computer display.
✻ If a cartridge is removed in mid-roll j and then loaded into a
camera which does not have the mid-roll change function, the
cartridge will be set to exposed k and can no longer be
used.
Fig. 43