Filter
Top Products
110
Connecting to a PC
CAUTION
• FinePix A920, FinePix A900, FinePix A825, FinePix
A820, FinePix A800 and FinePix A610 is compatible
with PTP (Picture Transfer Protocol)/MTP (Media
Transfer Protocol). A PTP/MTP-compatible camera is a
camera that can recognize the PC and printer
automatically when connected.
• Do not disconnect the USB cable (mini-B) when the
camera is communicating with a PC. If the USB cable
(mini-B) is disconnected during communication, the
files on the Memory Card or internal memory may be
damaged.
• In Mac OS X, you must set automatic setup the first time
you connect the camera to your PC.
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC.
• The camera and PC may be exchanging data even
when [Copying] disappears from your PC screen.
Before disconnecting the USB cable (mini-B), always
check that the indicator lamp is off.
• Always use FinePixViewer to transfer images with voice
memos to a PC.
• The cost of an Internet provider for connecting to the
internet is the user’s responsibility.
• When using FinePixViewer to save images on a data
server (network), FinePixViewer may not run as it would
in a standalone PC environment.
CAUTION
• Always use the FUJIFILM AC Power Adapter AC-3VX
(sold separately). If the camera suddenly loses power
during data exchange, the Memory Card or internal
memory could be damaged.
• Make sure that the USB cable (mini-B) is connected
correctly and securely.
• Connect the camera directly to the PC using the USB
cable (mini-B). The software may not operate correctly
when you use an extension cable, or if you connect the
camera via a USB hub.
• When your PC has more than one USB port, the
camera can be connected to either port.
• When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before installation.
• A memory Card, the internal memory, data in a Memory
Card or data in the internal memory could be damaged
if any of the following are performed;
- the USB cable is disconnected
- power switch or buttons are pressed, or the lens cover
is interfered with