Filter
Top Products
95
Viewing Images
6
94
5
Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
●
!
Press the “BACK (DISP)” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
6.2.2 Specifying images for printing without using DPOF
(
single-frame printing
)
AC-3V (sold separately)
USB socket
2
1Connect the camera to the printer using the USB
cable (included).
2Turn the printer on.
3
1Set the Mode switch to “w”.
2Press the “POWER” button to turn the camera
on.
“s” appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
setting is
“®”.
●
!
Depending on the printer, some functions are disabled.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-3V (sold
separately) or AC-3VW (included with optional PictureCradle
CP-FXA10) to your camera.
●
!
Use an xD-Picture Card that was formatted in the camera.
1Press the “POWER” button to turn the camera
on.
2Select “®” in “USB MODE” in the SET-UP
menu (➡P.78).
3Press the “POWER” button to turn the camera
off.
●
!
Do not connect to a PC when the USB mode setting is set to
“
®”. See P.115 if you connect to PC by mistake.
1
01 033
02
AC-3V (sold separately)
USB socket
2
1Connect the camera to the printer using the USB
cable (included).
2Turn the printer on.
3
1Set the Mode switch to “w”.
2Press the “POWER” button to turn the camera
on.
“s” appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
setting is
“®”.
●
!
Depending on the printer, some functions are disabled.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-3V (sold
separately) or AC-3VW (included with optional PictureCradle
CP-FXA10) to your camera.
●
!
Use an xD-Picture Card that was formatted in the camera.
1Press the “POWER” button to turn the camera
on.
2Select “®” in “USB MODE” in the SET-UP
menu (➡P.78).
3Press the “POWER” button to turn the camera
off.
●
!
Do not connect to a PC when the USB mode setting is set to
“
®”. See P.115 if you connect to a PC by mistake.
1
01 033
02
4
1Press “a” or “b” to select “u PRINT DPOF”.
2Press the “MENU/OK” button.
●
!
When “d” appears, the DPOF settings are not
specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix E550 beforehand (➡P.70).
●
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted from printers that do not support date
printing.
01 02
When a printer that supports PictBridge is available, images can be printed by connecting the
camera directly to the PictBridge-compatible printer without using a PC.
●
!
In PictBridge function, images photographed on other than a camera may not be printed.
6.2
CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
—
PictBridge FUNCTION
6.2.1
Specifying images for printing on the camera
Continued