Filter
Top Products
19
Using the Camera
2
18
BASIC OPERATION GUIDE
0 Changing between the viewfinder (EVF) and the monitor (LCD)
Pressing the “EVF/LCD” button toggles between
the viewfinder and the LCD monitor. Use whichever
mode is best suited to your shot.
Low Light Viewfinder button
The screen brightness is increased briefly.
DISP/BACK button
DISP: Press this button to select the screen
display.
BACK: Press this button to stop a procedure
midway through.
0 Using the Menus
1Display the menu.
Press the “MENU/OK” button.
4Confirm the setting.
Press the “MENU/OK” button.
2Select a menu option.
Press the left or right arrow on the 4-direction
button.
3Select a setting.
Press the up or down arrow on the 4-direction
button.
Instructions for the next step in the procedure
appear at the bottom of the screen. Press the
button indicated.
For example, to trim the image as shown in the
figure at right, press the “MENU/OK” button.
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is shown
as “a” or “b”, and left or right is shown as “d” or “c”.
◆ Displaying the On-screen Help ◆
0 g button
Photography: d button Turns Macro ( ) on and off.
c button Sets the flash ( ).
Playback: Change frame or movie frame advance.
0
( a ) , ( b ) / Zoom button
Photography: Press
“
T
”
to zoom in (telephoto).
Press
“
W
”
to zoom out (wide-angle).
Playback: Press
“
T
”
to enlarge the image.
Press
“
W
”
to revert to normal display.