Filter
Top Products
4 Settings
59
Settings
4
58
SET-UP
F USING THE SET-UP SCREEN
●
!
Always turn the camera off when replacing the batteries.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off may cause the camera
settings to revert to the factory default values set at shipment.
1Press the “MENU/OK” button to display the
menu on the screen.
2Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “SET-UP”.
3Press the “MENU/OK” button to display the
SET-UP screen.
Press “d” or “c” to move to options 1 to 3.
After you have changed the settings, press the
“MENU/OK” button to confirm the changes.
1Press “a” or “b” to select a menu option.
2Press “d” or “c” to change the setting. Press
“c” for “FORMAT”, “DATE/TIME”, “TIME
DIFFERENCE”, “DISCHARGE” or “q RESET”.
3
4
01
02
01
0203
1
2
1Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “fi EVF/LCD”.
2Press the “MENU/OK” button.
2
1Press “d” or “c” to adjust the screen
brightness.
2Press the “MENU/OK” button to confirm the new
setting.
3
●
!
To end this procedure without changing the settings, press
the “DISP/BACK” button.
01
02
01
02
1
1Set the Power switch to “q” or “w”.
2Press the “MENU/OK” button to display the
menu on the screen.
●
!
The monitor brightness specified here remains valid until the
setting is changed again. This setting applies to both
photography and playback, and can be used to change the
monitor brightness in both modes.
fiADJUSTING EVF / LCD
(
THE MONITOR BRIGHTNESS
)
01 02