Filter
Top Products
7
LCD status display
The following illustration shows all LCD status icons available in the
LCD display:
1. Auto Flash
2.
Frame Counter
3.
Flash Mode
4.
Self-timer
5.
Red-eye Reduction
6.
Delete
7.
Battery Power Indicator
8.
Hi/Lo Resolution
Icon Meaning
The delete image function is enabled. Refer to page 18 for
information on deleting images.
The flash function. The following options are available by
repeatedly pressing the flash button:
Note: The green LED illuminates when the flash is ready.
Automatic Flash: The flash occurs automatically when
ambient lighting is insufficient for image capture.
Flash Always On: The flash is used with every image.
Use this option when you are trying to take pictures of
subjects with bright light behind.
No Flash: The flash function is disabled.
Red Eye Reduction: The flash pre-fires just before the
picture is taken to reduce red-eye effect. It functions with
all flash modes.
Display indicates the following parameters:
HI
640 x 480 fine resolution, 33 images maximum (using the
2 MB SmartMedia card). Use this setting for bigger file
sizes/higher resolution images.
LO
320 x 240 standard resolution, 133 images maximum
(using the 2 MB SmartMedia card). Use this setting for
smaller file sizes/lower resolution images.
Indicates when the self-timer function is available. Refer to page
17 for details on using the self-timer.
Indicates the battery capacity.
Indicates the number of images that have been taken.
The following table explains the meaning of each icon: