Filter
Top Products
15
Setting the flash
Follow these instructions to set the flash for the ix-10 Digital Camera:
1.
Turn the camera on. When
the green LED indicator
lights, the camera is ready
to take a picture.
2.
Check the current settings
in the LCD status display.
Note: The ‘0000’ indicates
that the SmartMedia card is
inserted. A symbol
’
indicates that no
SmartMedia is inserted.
3.
Press the flash mode button
and select the mode you
want.
Note: The flash mode button has a response time of 0.4 seconds.
Current Flash Setting
Power On/off
Switch
LED Indicato
r
Flash Mode Button