Filter
Top Products
Product Features and Precautions for Use
• Water, Dust,and ShockResistance
']) The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance
standards, and has passed FUJlFILM drop tests (drop height: 1.5 m/4.9 ft.; impact surface: ply-
wood, thickness 5 cm/2.0 in.) compliant with MIbSTD 81 OFMethod 516.5: Shock.These results
were obtained through in-house testing and are not a blanket guarantee of water resistance
or invulnerability to damage or destruction.The accessories supplied with the camera are not
water resistant.
• BeforeUse
':!) The front surface of the camera lens is protected by a sheet of glass. Foreign matter on the
glass will appear in photographs; keep the glass clean at all times.
']) Be sure that the battery-chamber and connector covers are fully latched.The presence of wa-
ter, mud, or sand in the camera could cause malfunction.
']) Do not open or close the battery-chamber or connector cover with wet hands or near water,
for example while on or by abody of water.
']) Be sure the camera is completely dry before inserting or removing batteries or memory cards
or connecting the USBor A/V cable.
']) The camera does not float. Be sure to attach the strap and keep it around your wrist when
using the camera.
• DuringUse
':!) Restrict underwater use to depths of 5 m (16 ft.) or less and periods shorter than 120 minutes.
':!) Do not open or close the battery-chamber cover while under water.
']) Do not use in hot springs or heated pools.
':!) Do not dive into water with the camera or otherwise subject it to excessive force.
':!) If the camera is left on the sand, its temperature may exceed operating limits and sand may
get into the speaker or microphone.
':!) Sunscreen, suntan lotion, or other oily substances may discolor the camera body and should
be removed with a damp cloth.
':!) The camera may lose water resistance if subjected to excessive force or vibration. Consult your
retailer or a FUJIFILM-authorized repair technician.
xiii