Filter
Top Products
162
7.2 Setup mode functions
7.2 Setup mode functions
There are 29 items in setup mode as shown in the following.
LCD
display
Descriptions Selectable
parameters
Default Mode Remarks
On-
line
Off-
line
Double
Feed
Specify the double-feed
detection based on docu-
ment thickness. There
are two ways to detect
double-feed.
1: Document thickness
2: Document thickness +
Brake roller rotation
amount
No/Yes
1: Thickness
2: Thickness +
Brake roller
No Avail-
able
Avail-
able
Setup done
via the PC has
the priority.
Length
Check
Specify the double-feed
detection based on the
document length devia-
tion.
There are 3 selections for
the acceptable length
deviation tolerance as
shown right.
No/Yes
Ye s :
10/15/20mm
(Tolerance)
No Avail-
able
Avail-
able
Setup done
via the PC has
the priority.
IPC Pre-Set The scan parameters are
set with recommended
values automatically.
There are 5 choices as
shown right.
No
1:
2:
3:
4:
5:
No Avail-
able
Avail-
able