Fujitsu FI-5015C Photo Scanner User Manual


 
2.2 Loading Documents on ADF
fi-5015C Image Scanner Operator’s Guide 13
BASIC SCANNER OPERATIONS
2
Documents that are not square or rectangular
Very thin documents
Photographs
Do not use the following documents:
Paper-clipped or stapled documents
Documents on which the ink is still wet
Documents other than paper such as fabric, metal foil, or transparencies
HINT
When scanning semi-transparent documents, slide the [Brightness] bar
to light to avoid bleed through.
To prevent the rollers from becoming dirty, avoid scanning documents
containing large areas written or filled in pencil. If scanning of such doc-
uments is unavoidable, clean the rollers frequently
ATTENTION
Carbonless paper contains chemical substances that may damage the
Pad ASSY or rollers (e.g. Pick roller) when these types of documents
are fed. Pay attention to the following:
Cleaning:
If pick errors occur frequently, clean the Pad ASSY.
For details on cleaning the Pad ASSY, refer to "3.2.3 Cleaning the
ADF" on page 41.
Replacing parts:
The service lives of the Pad ASSY and Pick roller ASSY are some-
times shortened when scanning medium-grade paper documents.
If paper containing wood is scanned, the service life of the Pad and
Pick roller may become shorter than that of the Pad and Pick roller
used for scanning only woodfree paper.
The pad or rollers of the scanner could be damaged if photographs or
sheets of paper attached to the scanned document have contact with
the pad or rollers during scanning.
Scanning documents of calendered paper such as photographs may
damage the surface of them.