M3092DC Image Scanner Operation Guide 3-7
3.3.2 Setting Documents
This section explains how to set documents.
Loosening documents
Before setting documents, sufficiently loosen them by the following
procedure:
•
Remove a 4 mm thick section of pages, hold the ends of the
documents with both hands, and bend the documents.
•
Hold the documents strongly with both hands so that both ends of the
documents are slanted, and then unbend the documents so that they
are inflated.
•
Repeat the operations described above two or three times.
•
Turn the document by 90
o
and similarly loosen it.
4mm
Leveling both ends and setting the documents
Level both ends of the documents so that they can be read correctly.
Set the documents as follows:
For single-side reading: Place the reading side facing the document
support surface.
4 mm