Filter
Top Products
RX600 S4 Options Guide 27
Processors Replacing a processor
6.2 Replacing a processor
V CAUTION!
You may only use processors of the same type on the system board.
Ê Open the server as described in the chapter “Preparation” on page 17f.
Ê Remove the processor cover (see page 22)
Figure 10: Removing the heat sink
Ê Remove the four screws of the heat sink. First undo two diagonally opposite
screws, then the other two.
Ê Turn the heat sink carefully back and forth to loosen it. Then lift it out to
remove it.