Fujitsu RX600 S4 Security Camera User Manual


 
RX600 S4 Options Guide 45
Battery for the RAID5 controller Installing the battery (iBBU)
Figure 28: SAS riser card (top) and battery iBBU (bottom)
Ê Plug the connector (B) of the battery onto the connector (A) on the SAS riser
card.
Ê Fasten the battery to the SAS riser card with the three supplied screws.
Ê Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 47f.
A
B