GE A1030 Digital Camera User Manual


 
46 4746 47
Image Stabilization mode
Setting the Image Stabilization function under
( ) mode.
(Stabilization during Movie mode is only
available when the Frame Rate is set to 15 fps)
1.Switch the mode dial to ( ) mode.
2.Press the button to enter the
Function
menu.
3.Use the
Left/Right
navigation buttons to
highlight the
Quality
function.
4.Use the
Up/Down
navigation buttons to
select 15fps, and press the button to
conrm your settings.
5.Press the
Menu
button, and use
Up/Down
to select the Image Stabilization settings.
6.Use
Up/Down
to select
Off
or
On.
Then press the button to conrm.
The Image Stabilization mode combats the
effect of hand shake and allows you to take
pictures that would otherwise be blurred.
1.Switch the mode dial to ( ) mode.
2.Press
Shutter
halfway to focus on the
subject.
3.Press
Shutter
fully to capture the image.