Filter
Top Products
IP camera
home router/gateway connection shown as below.
• Connect the power supply to the Power connector, and then plug the supply into
an available power outlet.
• Insert the SD card (optional) into the SD card slot as shown below (figure 6).
Figure 6. Insertion of SD memory storage card
Caution
During Power On or while pressing SW1 button; LED(D5) flash for 3 times follow with a
short period of light out(about 5 seconds) for system reinitiating process. When system
regains its working stage, the LED (D5) should flash in a 1 second interval.
During Power ON or while pressing SW2 button; press and hold 5 seconds continuously
then release, will be restored to factory default.
Make sure your CAM77IP Network Camera are using the provided power adaptor, using
unauthorized power adaptor may due damage to the Network Camera.